GE MiCOM P40 Technical Manual page 820

Appendix B -Settings and Signals
MENU TEXT
Setting that defines the IM6 fallback status.
IM6 FrameSyncTim
Time delay after which 'IM6 DefaultValue' is applied.
IM7 Cmd Type
Setting that defines the operative mode of the InterMiCOM_7 signal.
Selecting the channel response for this bit to Blocking allows fastest signalling, whereas setting to Direct offers higher security at the
expense of speed.
Selecting the channel response for this bit to Permissive offers higher dependability
IM7 FallBackMode
Setting that defines the status of IM7 signal in case of heavy noise and message synchronization being lost.
If set to 'Latching' the last valid IM7 status will be maintained until the new valid message is received.
If set to 'Default', the IM7 status, pre-defined by the user in 'IM7 DefaultValue' cell will be set. A new valid message will replace 'IM7
DefaultValue', once the channel recovers.
IM7 DefaultValue
Setting that defines the IM7 fallback status.
IM7 FrameSyncTim
Time delay after which 'IM7 DefaultValue' is applied.
IM8 Cmd Type
Setting that defines the operative mode of the InterMiCOM_8 signal.
Selecting the channel response for this bit to Blocking allows fastest signalling, whereas setting to Direct offers higher security at the
expense of speed.
Selecting the channel response for this bit to Permissive offers higher dependability
IM8 FallBackMode
Setting that defines the status of IM8 signal in case of heavy noise and message synchronization being lost.
If set to 'Latching' the last valid IM8 status will be maintained until the new valid message is received.
If set to 'Default', the IM8 status, pre-defined by the user in 'IM8 DefaultValue' cell will be set. A new valid message will replace 'IM8
DefaultValue', once the channel recovers.
IM8 DefaultValue
Setting that defines the IM8 fallback status.
IM8 FrameSyncTim
Time delay after which 'IM8 DefaultValue' is applied.
FUNCTION KEYS
This column contains the function key definitions
Fn Key Status
Displays the status of each function key.
Fn Key 1
Setting to activate function key. The 'Lock' setting allows a function key output that is set to toggle mode to be locked in its current active
state.
Fn Key 1 Mode
B74
COL ROW DEFAULT SETTING
16 3B 1.5
16 40 Direct
16 41 Default
16 42 0
16 43 1.5
16 48 Direct
16 49 Default
16 4A 0
16 4B 1.5
17 00
17 01
17 02 Unlocked
17 03 Normal
DESCRIPTION
[Unsigned Integer(16 bit)]
From 0.01 to 1 in steps of 0.01
[Courier Number (time-seconds)]
Disabled
Permissive
Direct
[Indexed String]
Default
Latched
[Indexed String]
0 or 1
[Unsigned Integer(16 bit)]
From 0.01 to 1 in steps of 0.01
[Courier Number (time-seconds)]
Disabled
Permissive
Direct
[Indexed String]
Default
Latched
[Indexed String]
0 or 1
[Unsigned Integer(16 bit)]
From 0.01 to 1 in steps of 0.01
[Courier Number (time-seconds)]
Fn Key Status
[Binary Flag (10 bits) Indexed String]
Disabled
Unlocked (Enabled)
Locked
[Indexed String]
Normal
Toggled
[Indexed String]
AVAILABLE OPTIONS
P446SV-TM-EN-1
P446SV