GE MiCOM P40 Technical Manual page 772

Appendix B -Settings and Signals
MENU TEXT
DNP3.0 over Ethernet versions only. Setting to specify if time synchronisation received will be local or universal time
co-ordinate.
Tunnel Time Zone
Ethernet versions only for tunnelled courier. Setting to specify if time synchronization received will be local or universal time co-ordinate
CONFIGURATION
This column contains all the general configuration options
Restore Defaults
Setting to restore a setting group to factory default settings.
To restore the default values to the settings in any Group settings, set the 'restore defaults' cell to the relevant Group number. Alternatively it
is possible to set the 'restore defaults' cell to 'all settings' to restore the default values to all of the IED's settings, not just the Group settings.
The default settings will initially be placed in the scratchpad and will only be used by the relay after they have been confirmed by the user.
Note: Restoring defaults to all settings includes the rear communication port settings, which may result in communication via the rear port
being disrupted if the new (default) settings do not match those of the master station.
Setting Group
Allows setting group changes to be initiated via Opto Input or via Menu
Active Settings
Selects the active setting group.
Save Changes
Saves all relay settings.
Copy From
Allows displayed settings to be copied from a selected setting group
Copy To
Allows displayed settings to be copied to a selected setting group (ready to paste).
Setting Group 1
Settings Group 1. If the setting group is disabled from the configuration, then all associated settings and signals are hidden, with the
exception of this setting (paste).
Setting Group 2
Settings Group 2. If the setting group is disabled from the configuration, then all associated settings and signals are hidden, with the
exception of this setting (paste).
Setting Group 3
B26
COL ROW DEFAULT SETTING
08 33 UTC
09 00
09 01 No Operation
09 02 Select via Menu
09 03 Group 1
09 04 No Operation
09 05 Group 1
09 06 No Operation
09 07 Enabled
09 08 Disabled
09 09 Disabled
DESCRIPTION
UTC
Local
[Indexed String]
No Operation
All Settings
Setting Group 1
Setting Group 2
Setting Group 3
Setting Group 4
[Indexed String]
Select via Menu
Select via PSL
[Indexed String]
Group 1
Group 2
Group 3
Group 4
[Indexed String]
No Operation
Save
Abort
[Indexed String]
Group 1
Group 2
Group 3
Group 4
[Indexed String]
No Operation
Group 1
Group 2
Group 3
Group 4
[Indexed String]
Disabled
Enabled
[Indexed String]
Disabled
Enabled
[Indexed String]
Disabled
Enabled
AVAILABLE OPTIONS
P446SV-TM-EN-1
P446SV