GE MiCOM P40 Technical Manual page 835

P446SV
MENU TEXT
Value, once the channel recovers.
IM2 DefaultValue
Setting that defines the IM2 fallback status.
IM3 Cmd Type
Setting that defines the operative mode of the received InterMiCOM_3 signal.
When 'Direct' tripping is chosen, for security reasons 2 consecutive valid messages have to be received before a change in the signal status
will be acknowledged. That will impose an additional 1-2 ms delay comparing to 'Permissive' mode.
Set 'Direct' in Direct Transfer Tripping (Intertripping) applications.
Set 'Permissive' to accommodate any Permissive or Blocking scheme.
IM3 FallBackMode
Setting that defines the status of IM3 signal in case of heavy noise and message synchronization being lost.
If set to Latching the last valid IM3 status will be maintained until the new valid message is received.
If set to Default, the IM3 status, pre-defined by the user in IM3 Default Value cell will be set. A new valid message will replace IM3 Default
Value, once the channel recovers.
IM3 DefaultValue
Setting that defines the IM3 fallback status.
IM4 Cmd Type
Setting that defines the operative mode of the received InterMiCOM_4 signal.
When 'Direct' tripping is chosen, for security reasons 2 consecutive valid messages have to be received before a change in the signal status
will be acknowledged. That will impose an additional 1-2 ms delay comparing to 'Permissive' mode.
Set 'Direct' in Direct Transfer Tripping (Intertripping) applications.
Set 'Permissive' to accommodate any Permissive or Blocking scheme.
IM4 FallBackMode
Setting that defines the status of IM4 signal in case of heavy noise and message synchronization being lost.
If set to Latching the last valid IM4 status will be maintained until the new valid message is received.
If set to Default, the IM4 status, pre-defined by the user in IM4 Default Value cell will be set. A new valid message will replace IM4 Default
Value, once the channel recovers.
IM4 DefaultValue
Setting that defines the IM4 fallback status.
IM5 Cmd Type
Setting that defines the operative mode of the received InterMiCOM_5 signal.
When 'Direct' tripping is chosen, for security reasons 2 consecutive valid messages have to be received before a change in the signal status
will be acknowledged. That will impose an additional 1-2 ms delay comparing to 'Permissive' mode.
Set 'Direct' in Direct Transfer Tripping (Intertripping) applications.
Set 'Permissive' to accommodate any Permissive or Blocking scheme.
IM5 FallBackMode
Setting that defines the status of IM5 signal in case of heavy noise and message synchronization being lost.
If set to Latching the last valid IM5 status will be maintained until the new valid message is received.
If set to Default, the IM5 status, pre-defined by the user in IM5 Default Value cell will be set. A new valid message will replace IM5 Default
Value, once the channel recovers.
IM5 DefaultValue
Setting that defines the IM5 fallback status.
IM6 Cmd Type
P446SV-TM-EN-1
COL ROW DEFAULT SETTING
20 36 0
20 38 Permissive
20 39 Default
20 3A 0
20 3C Permissive
20 3D Default
20 3E 0
20 40 Permissive
20 41 Default
20 42 0
20 44 Permissive
DESCRIPTION
0 or 1
[Unsigned Integer(16 bit)]
Direct
Permissive
[Indexed String]
Default
Latched
[Indexed String]
0 or 1
[Unsigned Integer(16 bit)]
Direct
Permissive
[Indexed String]
Default
Latched
[Indexed String]
0 or 1
[Unsigned Integer(16 bit)]
Direct
Permissive
[Indexed String]
Default
Latched
[Indexed String]
0 or 1
[Unsigned Integer(16 bit)]
Direct
Permissive
[Indexed String]
Appendix B -Settings and Signals
AVAILABLE OPTIONS
B89