Table of Contents
Advertisement
a.
Page code list
This parameter page specifies transfer of the "Page code" list of the
parameter page supported by the IDD in the SEND DIAGNOSTIC command
and the RECEIVE DIAGNOSTIC RESULTS command to the INIT.
Table 4.118 shows the format of this parameter page. The page code list
supported by the IDD is transferred to the INIT by the RECEIVE
DIAGNOSTIC RESULTS command which is issued following the SEND
DIAGNOSTIC command that specifies this parameter page (shown in
Section 4.4.2 (1) )
Table 4.118 SEND DIAGNOSTIC parameters: page code list
Bit
7
Byte
0
1
0
2
3
b. Logical/physical address conversion
This parameter page specifies conversion of the address information
expressed in either the "Logical Block Address," "Physical Sector Address"
or "Byte Distance from the Index" format to another expression format.
Table 4.119 shows this parameter page format. The INIT can specify the
address information that should be converted in this parameter page of the
SEND DIAGNOSTIC command, and can read the conversion results by the
RECEIVE DIAGNOSTIC RESULTS command (see Section 4.4.2 (2)).
C141-C012
6
5
4
X '00' (Page Code)
0
0
0
X '00' (Page parameter length)
X '00' (Page parameter length)
4.4 Maintenance, Diagnostic Commands
3
2
1
0
0
0
0
0
4-179
Advertisement
Table of Contents
