Table 4-15. Information Description; Table 4-16. Tape Unit Mode Pages Menu; Table 4-17. Medium-Changer Mode Pages Menu; Table 4-18. Settable Mode Page 00 Menu - Fujitsu m2488 User Manual

CONFIGURATION
Step 2. Press the START push-button until MODE PGS is displayed. The information available is
described in Table 4-15.
Step 3. Press the TEST pushbutton.
The first item, TAPEUNIT, is displayed. Press TEST to view the selected mode pages for
Step 4.
the Tape Unit or START to view next option.
a. If there is an outstanding SCSI command or if there is a tape loaded in the tape drive then Off-line
mode cannot be entered.
OPTION
TAPEUNIT
MED-CHGR
OPTION
PAGE 00
PAGE 01
PAGE 10
OPTION
PAGE 00
OPTION SETTINGS
PG00/B02 BYT02:00
PG00/B03 BYT03:00
PG00/B04 BYT04:00
: :
PG00/Bnn BYTnn:00
PG00:WTR WTROM: Y
* Refer to the M2488 Product Guide, CG00000-0115xx, Chapter 5 for Mode Page 00 information.
4-14

Table 4-15. Information Description

Select sub-menu to modify Tape unit Mode pages (sub-menu
described in Table 4-16)
Select sub-menu to modify Medium-Changer Mode pages (sub-menu
described in Table 4-17)

Table 4-16. Tape Unit Mode Pages Menu

Display and/or Modify Tape-Unit Mode page 00 (sub-menu
described in Table 4-18)
Display and/or Modify Tape-Unit Mode page 01
Display and/or Modify Tape-Unit Mode page 10

Table 4-17. Medium-Changer Mode Pages Menu

Modify Medium-Changer Mode page 00 (sub-menu described in
Table 4-18)

Table 4-18. Settable Mode Page 00 Menu *

Mode Page 00, Byte 2
Mode Page 00, Byte 3
Mode Page 00, Byte 4
:
Mode Page 00, Byte nn
If Y, the setting data is written to nonvolatile memory.
N If N, the setting data is not written to nonvolatile memory.
CG00000-011403 REV. A
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
M2488 USER'S GUIDE
DEFAULT
SETTINGS
00
00
FE
:
00
Y
April 1997