Attaching/Removing The Connector Cover; Attaching The Connector Cover - Epson TM-T88VI-DT2 Technical Reference Manual

Attaching/Removing the Connector Cover

Attaching the connector cover

Follow the steps below to attach the connector cover to protect cables.
1
Align the hooks on the connector cover with the dents on the main body.
Be sure to hold both sides of the connector cover when attaching it, or it may become damaged.
If you use the product with the dedicated customer display (Model: DM-D110 for TM-T88V-DT/ TM-
T88VI-DT2), remove the U-shaped part from the connector cover.
Chapter 2 Setup
2
30