Event-List Configuration; Event-List; Interface - Zte ZXR10 Command Manual

Purpose
Command Modes
Syntax
Syntax
Description
Example
Related
Commands
Purpose
Command Modes
Syntax
5
C h a p t e r

Event-list Configuration

Table of Contents
event-list..........................................................................29
interface ..........................................................................29
logic ................................................................................30
no event-list all .................................................................31
show event-list .................................................................31
show event-list reference ...................................................31
time-range .......................................................................32

event-list

Use this command to configure all event lists.
Global configuration
event-list <name>
<name>
This example describes how to configure and delete event lists.
ZXR10(config)#event-list myEvent
ZXR10(config-event)#time-range morning active
ZXR10(config-event)#exit
ZXR10(config)#no event-list all
show event-list

interface

Use this command to configure the interface up/down sub event.
Delete the sub event with the no command.
Event configuration
interface <interface-name>{protocol | physical | admin}{d
own | up}
no interface <interface-name>{protocol | physical | admin
}{down | up}
Confidential and Proprietary Information of ZTE CORPORATION
name of the event lists.
29