Rmon Event - Zte ZXR10 Command Manual

ZXR10 Command Manual (Network Management Volume)
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
22 Confidential and Proprietary Information of ZTE CORPORATION
� If the non-existed index item is deleted, the system prompts
"Unknown etherStats number".
� If the memory or resource is unavailable, the system prompts
"Alloc buffer error or Resource unavailable".
This example describes how to configure statistics group on the
100 Mbps Ethernet interface. The sampling time is 300 seconds.
ZXR10(config-if)#rmon collection statistics 1 owner zte
show rmon statistics

rmon event

Use this command to configure a rmon event. Remove an event
with the no form of this command.
Global configuration
rmon event <index>[log][trap <community>][description
<string>][owner <string>]
no rmon event <index>
<index>
log
trap <community>
description <string>
owner <string>
� If event items with the same <index> are created, the system
prompts error. It is necessary to cancel the configuration of
the original same indexes with the no form of this command.
� If the non-existed index item is deleted, the system prompts
"Unknown event number".
� If the memory or resource is unavailable, the system prompts
'Alloc buffer error or Resource unavailable".
Use this command to configure a RMON event described as
log_trap_event. Meanwhile, record it in log and send trap infor-
mation to the management station.
community is public.
ZXR10(config)# rmon event 1 log trap public description
log_trap_event owner ZTE
Index number, range: 1~65535
Whether a record is generated
Community string for sending trap, with 1~32
characters
A brief description for the event, 30
characters, default: zte
Creator of the event, 30 characters, default:
config
The management station