Ethernet Oam Configuration; Set Ethernet-Oam Debug - Zte ZXR10 Command Manual

Purpose
Command Modes
Syntax
Instructions
Example
10
C h a p t e r
Ethernet OAM
Configuration
Table of Contents
set ethernet-oam debug .....................................................85
set ethernet-oam enable ....................................................86
set ethernet oam enable(interface configuration) ...................86
set ethernet-oam link-monitor enable ..................................87
set ethernet-oam link-monitor frame-period..........................87
set ethernet-oam link-monitor frame-seconds .......................88
set ethernet-oam link-monitor symbol-period .......................88
set ethernet-oam oui .........................................................89
set ethernet-oam period timeout mode.................................89
set ethernet-oam port link-monitor frame .............................90
set ethernet-oam remote-loopback start...............................90
set ethernet-oam remote-loopback time-out .........................91
show ethernet-oam ...........................................................91
show ethernet-oam interface discovery ................................91
show ethernet-oam interface link-monitor.............................92
show ethernet-oam interface statistics .................................92

set ethernet-oam debug

Use this command to set debug function of link ethernet OAM.
Global configuration

set ethernet-oam debug

� To view the configuration, use the show running-config com-
mand in global configuration mode.
� To cancel debug function, use the no set ethernet-oam
debug command.
This example describes how to set debug function of link ethernet
OAM in global configuration mode.
ZXR10(config)#set ethernet-oam debug
ZXR10(config)#no set ethernet-oam debug
Confidential and Proprietary Information of ZTE CORPORATION 85