Snmp-Server Enable Trap; Snmp-Server Engine-Id - Zte ZXR10 Command Manual

Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
In global configuration mode, input the above command lines di-
rectly, where, the parameter <notification-type> is the notification
type.
This example describes how to configure the agent to be able to
send all notifications.
ZXR10(config)#snmp-server enable inform
ZXR10(config)#snmp-server host 168.1.1.1 inform version 2c public
snmp-server host

snmp-server enable trap

Use this command to enable Simple Network Management Protocol
(SNMP) trap notifications. Cancel the setting with the no form of
this command.
Global configuration
snmp-server enable trap [<notification-type>]
no snmp-server enable trap [<notification-type>]
<notification-type>
All SNMP notifications are disabled by default.
�
This command is supported after the platform version 4.6.02
� In global configuration mode, input the above command lines
directly, where, the parameter <notification-type> is the noti-
fication (trap) type.
The following example shows how to enable the router to send all
traps to the host at IP address 168.1.1.1, using the community
string defined as public
ZXR10(config)#snmp-server enable trap
ZXR10(config)#snmp-server host 168.1.1.1 public
snmp-server host

snmp-server engine-id

Use this command to specify SNMP engine ID on the local device.
Return the engine ID to the default with the no form of this com-
mand. SNMP engine, as the core part in an SNMP entity, is used
to receive/authenticate SNMP messages, withdraw PDU assembled
messages, communicate with the SNMP program.
Global configuration
snmp-server engine_id <engine-id>
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 SNMP Configuration
Type of notification (trap), the notification
type can be one or more of the following
keywords: BGP, OSPF, RMON, SNMP, Stalarm,
VPN
11