Set Ethernet-Oam Enable; Set Ethernet Oam Enable(Interface Configuration); Zxr10(Config)#Interface Fei_1/1 - Zte ZXR10 Command Manual

ZXR10 Command Manual (Ethernet Switch Volume)
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
86 Confidential and Proprietary Information of ZTE CORPORATION
show supervlan

set ethernet-oam enable

Use this command to enable global link Ethernet OAM.
Global configuration
set ethernet-oam { enable | disable }
enable
disable
To view the configuration, use the show running-config com-
mand in global configuration mode.
This example describes how to enable debug function of link eth-
ernet OAM in global configuration mode.
ZXR10(config)#set ethernet-oam enable
set ethernet oam
enable(interface
configuration)
Use this command to enable link Ethernet OAM of some interface .
Interface configuration
set ethernet-oam { enable | disable }
enable
disable
� To view the configuration, use the show running-config com-
mand in global configuration mode.
� Fei and gei interfaces are supported by this command, while
sg interfaces are not supported.
This example describes how to enable global link Ethernet OAM in
interface configuration mode.

ZXR10(config)#interface fei_1/1

ZXR10(config-if)#set ethernet-oam enable
Enables global link Ethernet OAM.
Disables global link Ethernet OAM.
Enables global link Ethernet OAM.
Disables global link Ethernet OAM.