Flow Qos Configuration Example; Traffic Limit And Statistics Configuration Example - Zte ZXR10 5900E Series Configuration Manual

ZXR10 5900E Series Configuration Guide (QoS)
Command
show traffic-statistics{ipv4-access-list| ipv4-mix|
ZXR10#
ipv6-access-list| link-acl | ipv6-mix }< acl-name> rule-id < rule-no>
shelfID <shelf-no> slot <slot-no>
clear traffic-statistics {ipv4-access-list| ipv4-mix|
ZXR10#
ipv6-access-list| link-acl|ipv6-mix}< WORD> rule-id <
1-2147483644>
A description of the commands is as follows:
Parameter
{ipv4-access-list| ipv4-mix|
ipv6-access-list| link-acl|ipv6-mix}
rule-id < 1-2147483644>
The following is a sample output from the show command:
ZXR10#show traffic-statistics ipv4-access-list
test rule-id 10 shelfID 0 slot 1
Shelf:
ZXR10#
A description of the output commands is as follows:
Output Command
Shelf
SLOT
PKT/BYTE
STATUS

2.4 Flow QoS Configuration Example

2.4.1 Traffic Limit and Statistics Configuration Example

Configuration Description
Network A, Network B and internal servers are connected to an Ethernet switch, as shown
in Figure
ensure QoS of VOD, it shall be configured with a higher priority. Internal users can access
Internet through proxy 192.168.3.100. However, bandwidth of Network A and B shall be
limited and traffic statistics is required.
SJ-20150114102049-008|2015-01-15 (R1.0)
0 Slot: 1 PKT/BYTE:500
2-4. Internal servers include a VOD server with IP address 192.168.4.70. To
Description
The type and name of the bound ACL.
ACL rule number
STATUS: OK
Description
Shelf number.
Slot number of a line card.
The statistics value of the line card in this slot. PKT/BYTE is
determined by the traffic statistics configuration command.
Status of a line card.
2-12
ZTE Proprietary and Confidential
Function
Displays statistics of traffic
Clears statistics of traffic