Show Spanning-Tree Instance; Show Spanning-Tree Interface - Zte ZXR10 Command Manual

ZXR10 Command Manual (Ethernet Switch Volume)
Purpose
Command Mode
Syntax
Syntax
Description
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
56 Confidential and Proprietary Information of ZTE CORPORATION

show spanning-tree instance

Use this command to display information about an instance and
its ports.
All modes
show spanning-tree instance <instance>
<instance>
The platform version 4.6.02 and upgrade versions support this
command.
This example describes how to display information about instances
0 and 1.
ZXR10#show spanning-tree instance 0
Spanning tree enabled protocol mstp
Root ID: Priority
Hello Time
Forward-Delay
RegRootID: Priority
RemainHops
BridgeID: Priority
Hello Time
Forward-Delay
Interface Port ID
Name Prio.Nbr Cost
--------------------------------------------------------------
Fei_1/1 128.31 200000
ZXR10#show spanning-tree instance 1
Spanning tree enabled protocol mstp
RegRootID: Priority
Hello Time
Forward-Delay 15 sec;
BridgeID: Priority
Hello Time
Forward-Delay
Interface Port ID
Name Prio.Nbr
--------------------------------------------------------------
Fei_1/1 128.31 200000
ZXR10#

show spanning-tree interface

show spanning-tree interface

Use this command to display information about all instances of a
designated port.
All modes
show spanning-tree interface <port-name>
Instance number, in the range of 1~63 (the
instance 0 exists permanently)
32768; Address
2 sec; Max Age
15sec;
32768; Address
19
32768; Address
2 sec; Max Age
15 sec; MaxHops
Sts Role
forward root
32768; Address
2 sec; Max Age
RemainHops
32768; Address
2 sec; Max Age
15 sec; MaxHops
Cost Sts Role
forward root
00-0d-0d-f0-01-01
20 sec
00-0d-0d-f0-01-01
00-0d-0d-f0-01-02
20 sec
19
LinkType Bound
p2p MSTP
00-0d-0d-f0-01-01
20 sec
19
00-0d-0d-f0-01-02
20 sec
19
LinkType Bound
p2p MSTP