Parameterization; Parameterization Of The Station Proxy (Dap); Restart On K-Bus Failure; Internal Data Bus Extension - WAGO 750-370 Manual

Profinet io fieldbus coupler 2-port; 100 mbit/s; digital and analog signals
Hide thumbs Also See for 750-370:
Table of Contents

Advertisement

96
Commissioning
Pos : 69.5 /Serie 750 (WAGO-I/O-SYST EM)/In Betrieb nehmen/Fel dbus knoten i n Betrieb nehmen/PROFINET IO/Par ametri erung (750- 370) @ 23\mod_1433231032749_21.doc x @ 183216 @ 234444443 @ 1
8.6

Parameterization

The configuration is used to set the parameters (attributes) for the fieldbus coupler
as a station proxy (DAP) and for the I/O modules based on the device description
(GSD). The individual parameters are set via selectable textual descriptions.
8.6.1

Parameterization of the Station Proxy (DAP)

The following list provides an overview of configurable attributes for the station
proxy and descriptions of the individual parameters are listed in the subsequent
section.
Table 37: Parameterization – Overview of Attributes for the Station Proxy (DAP)
Attributes for the station proxy (DAP)
-

Restart on K-Bus failure

-

Internal data bus extension

-
Diagnostics of external module/channel errors
-
Process data representation
-
Response to PROFINET IO failure
-
Response to K-Bus failure
8.6.1.1
Restart on K-Bus Failure
Table 38: Parameterization DAP – Attribute Restart on K-Bus Failure
Attribute Name
Restart on K-Bus
failure
8.6.1.2
Internal Data Bus Extension
Table 39: Parameterization DAP – Attribute Internal Data Bus Extension
Attribute Name
Internal data bus
extension
Attribute Value
Description
After a fault, for example a missing end module, a
restart of the internal data bus will be initiated, if
POWER ON
*)
RESET
AUTORESET
*)
Default settings
Attribute Value
Description
The use of the internal data bus extension
EEPROM-setting is
*)
used
is not used
is used
*)
Default settings
WAGO-I/O-System 750
750-370 PROFINET IO Fieldbus Coupler
an interruption of the fieldbus controller
supply.
immediately after disappearing of the internal
bus fault.
depends on the setting in EEPROMs are made
according to the unlock value saved in the
EEPROM.
is excluded.
is possible.
Manual
Version 2.0.0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents