750-370 Profinet Io Fieldbus Coupler - WAGO 750-370 Manual

94 Commissioning
topology it is possible to pass on the tool based station name assignment
even during the first commissioning.
10. Switch on the fieldbus coupler power supply.
11. Alternative to the topology based station name assignment the station name
can be set by a DCP tool.
(See also the section "DCP".) or be defined using the available DIP switch
(See also the section "DIP switch".)
12. Upload the system data subsequently onto the IO controller.
After a successful connection establishment between the IO controller and the
IO device the state of productive data exchange is entered.
Pos : 69.2 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
WAGO-I/O-System 750

750-370 PROFINET IO Fieldbus Coupler

Manual
Version 2.0.0