Specific Channel Parameters; Table 46: General Channel Parameters - WAGO 750-370 Manual

WAGO-I/O-System 750
750-370 PROFINET IO Fieldbus Coupler

Table 46: General Channel Parameters

Parameter
Diagnostics
channel x
Process data format
channel x
Substitute output data
channel x
Substitute output status
channel x
8.6.6

Specific Channel Parameters

Some I/O modules have specific channel parameters in addition to the general
channel parameters. These I/O modules currently include:
750-450, 750-451, 75x-463, 75x-464, 75x-464/020-000,
75x-562, 75x-563,
75x-644, 75x-655, 75x-670, 75x-671, 750-672, 75x-673
Pos : 69.8 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 2.0.0
Setting Description
For external faults, channel diagnostics and the
respective alarms are
*)
lock •
release •
Word or double-word-orientated process data of
the signal channel are transmitted to the IO
controller in:
according to the Format set for the station proxy..
*)
device settings
INTEL (LSB-MSB) „Little Endian" format
MOTOROLA „Big Endian" format"
(MSB-LSB)
When configuring the substitute value behavior of
I/O module-specific the I/O module, these values are output to the
*)
0x0000 ... 0xFFFF complex signal channel with invalid output data of
the IO controller.
When configuring the substitute value behavior of
the I/O module, these values are output to the
*)
0 ... 1
binary signal channel with invalid output status of
the IO controller.
*)
Default setting
Commissioning
not transmitted to the IO controller.
transmitted to the IO controller.
101