Overload Protection; Parameterization Tools; Overview; Table 38 Overview Of Parameterization Tools - WAGO TEchDocs 765-4501/0100-0000 Manual

765-4501/0100-0000

5.4 Overload Protection

The module has internal overload protection for the output current. The output currently is
constantly measured and monitored for values exceeding the maximum.
If the measured output current exceeds the maximum value, the product reduces the cur-
rent or switches the corresponding loads off.

5.5 Parameterization Tools

5.5.1 Overview

There are several ways to set the product's parameters. The following table provides an
overview of the tools.
Tool
Controller with EtherNet/IP
scanner
WAGO Webserver I/O
Field
WAGO I/O Field App
WAGO IO-Link Configura-
tor
Three domains are distinguished for configuration and parameterization:
1. EtherNet/IP configuration: select EtherNet/IP connection.
2. Port configuration: digital input or output
3. IO-Link device configuration.
The following table shows which tool can influence which domain.
Tool
EtherNet/IP
scanner
Product manual | Version: 1.1.0
8PORT IOL-A FLD EI DC 24V 2.0A
Description
The EtherNet/IP scanner must be configured to exchange process data with the
modules. The EDS file wago_0765450x.eds (x = 1 ... 4) describes a WAGO I/O
System Field module. The configuration of the EtherNet/IP scanner can import this
EDS file.
The user can configure and parameterize a module. The user loads the configura-
tion onto the EtherNet/IP scanner. The EtherNet/IP scanner configures the module
via EtherNet/IP. Whether or not the scanner sends parameters (the port configura-
tion) depends on the connection selected.
For example, if connection 1 is used, the EtherNet/IP scanner transfers parameters
to the module.
For example, if connection 2 is used, the EtherNet/IP scanner transfers no param-
eters to the module, and the port must be configured with a different tool.
8 Selecting a Connection [} 81]
IP scanner parameters to be transferred and which does not.
The WAGO I/O Field Webserver is a Webserver that is integrated into the 765
module. Using a Web browser, the user can display the Web pages and display
and modify parameters.
The WAGO I/O Field app is an app for mobile devices that can communicate with
a 765 module via Bluetooth
WAGO IO-Link Configurator is software for configuring the WAGO IO-Link mas-
ters and the IO-Link devices.
EtherNet/IP Port Configuration
Connection
The EtherNet/ The EtherNet/IP scanner must be config-
IP scanner con- ured to exchange process data with the
figures the Eth- modules.
erNet/IP con- The EDS file wago_0765450x.eds (x = 1 ...
nection of the 4) describes a WAGO I/O System Field
765 module. module. The configuration of the EtherNet/
Table 38: Overview of Parameterization Tools
describes which connection causes EtherNet/
®
.
Table 39: Parameterization Overview
IO-Link Device Configuration
-
Functions
49