Specialty Modules; Up/Down Counter; Table 79: Module Types - Up/Down Counter; Table 80: Submodule Types And Data Lengths - Up/Down Counter - WAGO 750-370 Manual

WAGO-I/O-System 750
750-370 PROFINET IO Fieldbus Coupler
14.1.6

Specialty Modules

The module/submodule types are listed for the special-purpose modules and the
substitute I/O modules assigned in the tables below.
The subsequent tables for the submodule types and data lengths list the number of
data bytes provided in the respective process image for the individual submodules.
The respective number of bytes of the telegrams in the send and receive direction
is also specified as input IODIOC (provider) and output IOCIOD
(consumer).
14.1.6.1

Up/Down Counter

The group of up/down counters is divided into two module types.
Table 79: Module Types – Up/Down Counter
Module type
1(2)CNT
2CNT
For up/down counters, provider and consumer status (IOPS, IOCS) of the input or
output information are exchanged between the IO controller and IO device in both
directions.
The group of up/down counter is divided into the following submodule types.
Table 80: Submodule Types and Data Lengths – Up/Down Counter
PNIO module type
PNIO submodule type
1(2)CNT
1CNT
2CNT
2CNT
2CNT
Manual
Version 2.0.0
Description
1(2)-Channel Up/Down Counter,
32(16) bits input and output data plus
control byte and status byte per signal
channel, Access to the register structure
via cyclic data exchange
2- Channel Up/Down Counter,
16 bits input and output data plus control
byte and status byte per signal channel,
Access to the register structure via cyclic
data exchange
Process data length [byte]
Data type Input (I-PI) Output (O-PI)
{Unsigned8,
Unsigned8,
Unsigned32}
{Unsigned8,
Unsigned8,
Unsigned16[2]}
{Unsigned8,
Unsigned16}
Substitute I/O modules
75x-404, 750-633,
plus all variations
75x-638
6 6
6 6
6 6
Appendix 163
Telegram
allocation [byte]
Input Output
8 8
8 8
8 8