WAGO 750-370 Manual page 213

WAGO-I/O-System 750
750-370 PROFINET IO Fieldbus Coupler
Table 180: Structure of the Erroneously Configured Submodules
Byte
Data type
offset
8 / 9 WORD
The submodule entries follow directly one after the other. The number stored in
the module entry. The next module entry only follows after the submodule data
sets.
Pos : 99 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 2.0.0
Description
Submodule state (Submodule state.b15 = 1)
'000' ---
'001' The submodule is not available for takeover
b0
by IOSAR.
...
'010'
b2
... Reserved
'111'
0 No channel of the submodule contains
"QualifiedChannelDiagnosis".
b3
1 At least one channel of the submodule
contains "QualifiedChannelDiagnosis".
0 No channel of the submodule requires
maintenance.
b4
1 At least one channel of the submodule
demands maintenance.
0 No channel of the submodule demands
maintenance.
b5
1 At least one submodule channel demands
maintenance.
0 There is no diagnosis data available/stored for
this submodule.
b6 1 There is diagnosis data available for this
submodule: It can be read with the
corresponding records.
'0000' This AR is owner of the submodule.
'0001' This AR is owner of the submodule but it is
blocked, e. g. parameter checking is pending.
'0010' This AR is not owner of the submodule. It is
blocked by superordinated means.
b7
´0011' This AR is not owner of the submodule. It is
...
owned by another IOCAR.
b10
'0100' This AR is not owner of the submodule. It is
owned by another IOCAR.
'0101'
... Reserved
'1111'
'0000' Submodule OK
'0001' Submodule substituted
b11 '0010' Wrong submodule
... '0011' No submodule present
b14 '0100'
... Reserved
´1111'
b15 1 Format indicator
Reserved
Appendix 213