Special Ai Module Types (Ai, Rtd, Tc, Pm); Table 117: Parameterization - Overview Of Additional Attributes For Special Ai Module Types (2/4 Ai, Rtd, Tc, Pm); Table 118: Parameterization 2Ai, Rtd 463 - "Sensor Type" Attribute - WAGO 750-370 Manual

WAGO-I/O-System 750
750-370 PROFINET IO Fieldbus Coupler
14.2.5

Special AI Module Types (AI, RTD, TC, PM)

In addition to the attributes described above, there are other attributes for the
standard modules with no item number extension and for the variants with item
number extension "/003-000" depending on the I/O module type.
Table 117: Parameterization – Overview of Additional Attributes for Special AI Module Types (2/4
AI, RTD, TC, PM)
Additional Attributes for Special AI Module Types (2/4 AI, RTD, TC, PM)
- Sensor type (depending on module type)
- Connection type (depending on module type
- DC measurement (depending on module type)
- Internal data bus monitoring (depending on module type)
- Line frequency (depending on module type)
- Rogowski coil detection (depending on module type)
- Phase for peak value (depending on module type)
- Autoreset min./max. values (depending on module type)
- User scaling (depending on module type)
- Scaling factor for energy value (depending on module type)
- Storage interval for energy consumption (depending on module type)
- Transformer ratio (depending on module type)
- Operating interval for peak value (depending on module type)
- Reset interval min./max. (depending on module type)
The 2-channel / 4-channel analog input modules for 750-464 resistance sensors,
the 4-channel analog input modules for 750-463 resistance sensors, the 750-494
and 750-495 3-phase power measurement modules and the 4-channel / 8-channel
analog input modules for 750-450 and 750-451 resistance sensors also receive a
parameter set in the form of a record write request to the data set number or index
0x2000 or 8192.
This data set receives the following attributes that can be set depending on the
I/O module type (item number).
Table 118: Parameterization 2AI, RTD 463 – "Sensor Type" Attribute
Attribute name
Sensor type
Manual
Version 2.0.0
Attribute value Description
Pt 100 (EN 60751)
Ni 1000
(DIN 43760)
See the manual for the 75x-463 I/O module
Ni 1000 (TK 5000,
at: www.wago.com
DIN 43760)
KTY 81 110
KTY 81 210
Appendix 179