750-370 Profinet Io Fieldbus Coupler - WAGO 750-370 Manual

WAGO-I/O-System 750

750-370 PROFINET IO Fieldbus Coupler

Fieldbus coupler or controller
Internal system supply module
Input current I
Pos : 18.15.19 /Seri e 750 ( WAGO-I/O-SYSTEM)/Systembes chr eibung/Versorgung/Systemvers orgung - Ausl egung - n= 0,87 (87% N etz teil wir kungsgrad bei 24 V) @ 3\mod_1232950112718_21.doc x @ 26824 @ @ 1
Pos : 18.15.20 /Seri e 750 ( WAGO-I/O-SYSTEM)/Systembes chr eibung/Versorgung/Systemvers orgung - Ausl egung - Hi nweis: Bei Test der Str omaufnahme Ausg äng e akti vi eren @ 3\mod_1232950110750_21.doc x @ 26812 @ @ 1
Activate all outputs when testing the current consumption!
If the electrical consumption of a power supply point for the 24 V system
supply exceeds 500 mA, then the cause may be an improperly dimensioned
node or a defect.
During the test, you must activate all outputs.
Pos : 18.15.21 /D okumentation allgemein/Gliederungselemente/---Sei tenwechsel--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 2.0.0
I = Sum of all the internal current consumption of the connected
(5 V) total
I/O modules + internal current consumption of the fieldbus
coupler/controller
I = Sum of all the internal current consumption of the connected
(5 V) total
I/O modules at internal system supply module
5 V
= ×
(24 V)
24 V
η = 0.87
(87 % Efficiency of the power supply at nominal load 24 V)
I
(5 V) total
η
System Description 27