750-370 Profinet Io Fieldbus Coupler - WAGO 750-370 Manual

WAGO-I/O-System 750

750-370 PROFINET IO Fieldbus Coupler

The second, third and fourth submodule can occupy the required data
volume of 4 bits each, i.e. 12 bits.
For the fifth submodule, only 2 bits are available. The fifth module is
marked as wrong the data is not fully allocated.
Because there was not already enough information available for the
preceding module and the allocated area has been declared as "exhausted"
by the fieldbus coupler, no allocated area is available for the sixth
submodule. This module is also marked as wrong.
Pos : 66.12 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 2.0.0
Function Description 85