Individual Parameterization Of I/O Modules Via Ipar Server; Figure 41: Ipar Server - WAGO 750-370 Manual

WAGO-I/O-System 750
750-370 PROFINET IO Fieldbus Coupler
7.8 Individual Parameterization of I/O Modules via
iPar Server
The iPar server provides services for saving and restoring individual parameters
for quick device replacement without using additional manufacturer tools for
parameterization of device functions.
The iPar server is a function block or available as a system function within the
non-safety related part of the safe PLC.
Currently, you can only use the iPar server mechanisms with the PROFIsafe V2
I/O modules.
To parameterize device functions of these I/O modules, the individual parameters
are used that have to be set at start-up using a manufacturer tool, in this case
WAGO-I/O-CHECK bzw. WAGO-SEDI due to the current definitions.

Figure 41: iPar Server

Manual
Version 2.0.0
Function Description 87