Section 14 Voice Memory Function; Recording A Qso Audio; D To Start Recording; D To Stop Recording - Icom IC-7100 Instruction Manual

Previous view
14
VOICE MEMORY FUNCTION

Recording a QSO audio

The Voice Memory function records a QSO (communi-
cation) audio onto the SD card.
This function enables you to record both received and
transmitted audio, a QSO with a DX'pedition, and play-
back the recorded audio after the QSO.
NOTE: Be sure to insert an SD card into the trans-
ceiver before recording a QSO audio.
D
To start recording
q
Push (C) to open the Quick Menu screen.
QUICK
w
Touch the "<<REC Start>>" item to start voice re-
cording.
• Touch [√](D) one or more times to select the desired
page.
• The transceiver displays "Recording started" and auto-
matically exits the Quick Menu screen.
• " " appears while the recording is paused.
• " " appears and " " and " " alternately blink while record-
ing.
• Recording is continuous until you manually stop record-
ing, or the card becomes full.
• If the recording fi le's content reaches 2GB, the transceiv-
er automatically creates a new fi le, and continues record-
ing.
NOTE: Once recording has started, it will continue,
even if the transceiver is rebooted.
✓
Convenient!
When the PTT Automatic Recording function is set to
ON, the recording automatically starts when [PTT] is
pushed. (p. ??-??)
( Voice Memo > QSO Recorder > Recorder Set >
PTT Auto REC)
D
To stop recording
q
Push (C) to open the Quick Menu screen.
QUICK
w
Touch "<<REC Stop>>" to stop voice recording.
• Touch [√](D) one or more times to select the desired
page.
• The transceiver displays "Recording stopped," and auto-
matically exits the Quick Menu screen.
L eft D isplay
C enter
While recording
While pausing
14-2
The L, R, C or D in the
R ight
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
QUICK
Touch
"<<REC Start>>"
Touch
"<<REC Stop>>"