Section 6 Voice Memory Function; Recording A Qso Audio - Icom ID-31A PLUS Advanced Manual

6
VOICE MEMORY FUNCTION

Recording a QSO audio

NOTE:
• You must insert a microSD card into the
transceiver before recording audio.
• The recording function is continuously ON, even if
the transceiver is turned OFF then ON again.
To start recording
1� Push [QUICK]�
2� Select <<REC Start>>.
▼
• "Recording started" is displayed and then returns to
the main display screen.
▼
Innorration
L
• The recording pauses while no signal is received, and
resumes when a signal is received again.
• The recording continues until you manually stop recording,
or the card becomes full.
• If the recording file's content reaches 2GB, the transceiver
automatically creates a new file, and continues recording.
TIP: When RX REC Condition is set to "Always,"
the recording automatically starts when
"<<REC Start>>" is selected. In that case, recording
continues, even when no signal is received.*
See page 11-? for details�
* The recorded file contains no sound.
( MENU > Voice Memo > QSO Recorder >
Recorder Set > RX REC Condition)
[Up]
[ENT]
[Down]
Recording standby
The recording starts when
you transmit or the squelch
opens.
While recording, the SD
card icon blinks�
To stop recording
1� Push [QUICK]�
2� Select "<<REC Stop>>".
▼
6-2