Recording A Qso Audio - Icom ID-50A Basic Manual

■ Recording a QSO audio

NOTE:
• Once a voice recording starts, the Recording function will be continuously turned ON until
you stop recording, even if you turn OFF the transceiver.
• FM Radio audio cannot be recorded.
1. Push [QUICK].
2. Select "<<REC Start>>."
• "Recording started" is displayed.
L Information
• The function records the audio on the MAIN band while the Dualwatch function is ON.
• The function records the audio on the displayed band (A or B) while the Dualwatch
function is OFF.
• is displayed while recording.
•
is displayed while the recording is paused.
• Recording continues until you stop recording, or the card becomes full.
• If the recording file reaches 2GB, the transceiver automatically creates a new file and
continues recording.
3. Push [QUICK].
4. Select "<<REC Stop>>."
• "Recording stopped" is briefly displayed, and voice recording stops.
TIP: As the default setting
• The recording is paused while the squelch is closed, and resumes when a signal is
received. ([MENU] > RECORD > QSO Recorder > Recorder Set > RX REC Condition)
• The recording automatically starts when you start to transmit, even if the Recording function
is turned OFF. ([MENU] > RECORD > QSO Recorder > Recorder Set > PTT Auto REC)
RECORDING A QSO ONTO A microSD CARD
6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
26