Install The Front I/O Assembly - Oracle SPARC T7-4 Service Manual

Related Information
"Main Module Components" on page 20
■
"Install the Front I/O Assembly" on page 145
■

Install the Front I/O Assembly

This procedure requires that you handle components that are sensitive to static
Caution -
discharge. Static discharges can cause the components to fail.
1. Take the necessary ESD precautions.
See "Prevent ESD Damage" on page
2. Insert the front I/O assembly into position in the main module.
Gently slide the front I/O assembly into position with the ports inserted into
a.
the port holes in the front of the main module (panel 1).
Lower the rear of the front I/O assembly so that the captive screw is aligned
b.
with the screw hole on the motherboard and tighten the screw (panel 2).
Connect the assembly's ribbon cable to the connector on the motherboard
c.
(panel 3).
49.
Servicing the Front I/O Assembly
Install the Front I/O Assembly
145