Oracle SPARC T7-4 Service Manual page 138

Replace the Battery
2. Replace the battery.
Replacing the battery is a cold-service procedure. The server must be
and power cables disconnected before performing this procedure.
a. Prepare the server for
Remove the main module from the server.
b.
See
c. Locate the battery in the main module.
See
d. Remove the old battery
Pinch the battery between two fingers and slide it up and out of the battery holder.
e. Unpack and install the new battery.
138 SPARC T7-4 Server Service Manual • May 2017
service.
"Remove the Main Module" on page
"Main Module Components" on page
completely powered off
101.
20.