Oracle SPARC T7-4 Service Manual page 182

Verify a PCIe Card
See "Interpreting LEDs" on page
3. Verify that the System PCIe Fault LED on the front panel is not illuminated.
See "Front Panel Controls and LEDs" on page
4. Consider your next steps.
If any of the LEDs are illuminated, see
■
If none of the LEDs are illuminated, go to
■
5. Verify that the green Power LED is lit on the PCIe card carrier that you installed.
6. At the Oracle Solaris prompt, ensure that the PCIe card is connected and online:
# hotplug list -cv
Connection
______________________________________________________________________________
PCIE1
...
PCIE7
Device
___________________________________________________________________________
SUNW,qlc@0
fp
disk
fp@0,0
SUNW,qlc@0,1
fp
disk
fp@0,0
PCIE13
PCIE15
Related Information
"Understanding PCIe Root Complex Connections" on page 165
■
"PCIe Card Configuration" on page 168
■
"PCIe Carrier Handle and LEDs" on page 169
■
"Determine Which PCIe Card Is Faulty" on page 170
■
"Remove a PCIe Card Carrier" on page 171
■
"Remove a PCIe Card" on page 174
■
"Install a PCIe Card" on page 177
■
"Install a PCIe Card Carrier" on page 180
■
182 SPARC T7-4 Server Service Manual • May 2017
27.
29.
State Description
EMPTY PCIe-Native
ENABLED PCIe-Native
Usage
-
-
-
-
-
-
-
-
EMPTY PCIe-Native
EMPTY PCIe-Native
"Diagnostics Process" on page
Step 6.
26.