Install A Hard Drive - Oracle SPARC T7-4 Service Manual

Install a Hard Drive

See "Install a Hard Drive" on page
Related Information
"Determine Which Hard Drive Is Faulty" on page 90
■
"Install a Hard Drive" on page 94
■
"Verify a Hard Drive" on page 95
■
Install a Hard Drive
Hard drives are hot-service components that can be replaced by customers. For the location of
the hard drives, see
Caution -
discharge. This discharge can cause failure of server components.
1. Align the replacement drive to the drive slot, and slide the drive in until it is
seated.
Drives are physically addressed according to the slot in which they are installed. If you are
replacing a drive, install the replacement drive in the same slot as the drive that was removed.
See "Hard Drive Configuration" on page 87
2. Close the latch to lock the drive in place.
3. Verify the installation.
94 SPARC T7-4 Server Service Manual • May 2017
"Hard Drive Configuration" on page
This procedure requires that you handle components that are sensitive to electrostatic
94.
87.
for drive slot information.