In some cases, the output of the fmadm faulty command might include this message for the
faulty component:
Component faulted and taken out of service
If this message appears in the output, you must reset the server after you manually repair the
fault.
faultmgmtsp> exit
-> reset /System
Are you sure you want to reset /System? y
Resetting /System ...
Related Information
"PSH Overview" on page 25
■
"Check for Faults" on page 33
■
System Schematic
This schematic shows the connections between and among specific components and device
slots. You can use this schematic to determine optimum locations for any optional cards or other
peripherals based on system configuration and intended use.
System Schematic
Detecting and Managing Faults
41