Oracle SPARC T7-4 Service Manual page 39

default_verbosity : User role required for set = r
error_level : Diag level when running after an error reset
error_level : Possible values = off, min, max
error_level : User role required for set = r
error_verbosity : Diag verbosity when running after an error reset
error_verbosity : Possible values = none, min, normal, max
error_verbosity : User role required for set = r
hw_change_level : Diag level when running after a hw change
hw_change_level : Possible values = off, min, max
hw_change_level : User role required for set = r
hw_change_verbosity : Diag verbosity when running after a hw change
hw_change_verbosity : Possible values = none, min, normal, max
hw_change_verbosity : User role required for set = r
->
Depending on the server configuration, setting the HOST keyswitch_state diagnostics
Note -
verbosity to none might result in no POST test status displaying on the console for an extended
period of time.
You can also set the virtual keyswitch to determine the diagnostic level after
3.
an error reset and after a hardware change. To set error_level, to max, and
hw_change_level to max, type.
-> set /HOST/diag error_level=max
-> set /HOST/diag hw_change_level=max
View the current values for settings.
4.
Example:
-> show /HOST/diag
/HOST/diag
Targets:
Properties:
error_reset_level = max
error_reset_verbosity = normal
hw_change_level = max
hw_change_verbosity = normal
level = min
mode = normal
power_on_level = max
Configure POST
Detecting and Managing Faults 39