Oracle SPARC T7-4 Service Manual page 129

2. Lower the side of the SPM with the Align Tab sticker down on the service
processor tab on the motherboard.
3. Lower the other side of the SPM down and press down on the SPM to seat it into
the connectors on the motherboard.
Install the main module back into the server.
4.
See "Install the Main Module" on page
5. Connect a terminal or a terminal emulator (PC or workstation) to the SER MGT
port.
If the replacement SPM detects that the SPM firmware is not compatible with the existing host
firmware, further action is suspended and the following message is delivered over the SER
MGT port.
Unrecognized Chassis: This module is installed in an unknown or
unsupported chassis. You must upgrade the firmware to a newer
version that supports this chassis.
If you see this message, go on to
If you do not see this message, go to Step
Download the system firmware.
6.
a. Configure the SER MGT port to enable the firmware image to be
downloaded.
105.
Step 6.
Step 7.
Install the SPM
Servicing the SPM 129