Oracle SPARC T7-4 Service Manual page 65

2. Determine your next step.
If you are installing a processor module after replacing or installing DIMMs,
■
go to Step 3.
If you are installing a new processor module to replace a faulty one, install
■
all of the DIMMs that you removed from the faulty processor module into the
replacement module. See
Open the latches on the processor module or processor filler module, and insert
3.
the module into the empty processor module slot in the server.
A processor filler module can only be installed in slot 1.
Note -
4. Bring the levers together toward the center of the module and press the levers
firmly against the module to fully seat the module back into the server.
Install a Processor Module or Processor Filler Module
"Install a DIMM" on page 80.
Servicing Processor Modules 65