Install The Rear Chassis Subassembly - Oracle SPARC T7-4 Service Manual

Install the Rear Chassis Subassembly

1. Slide the rear chassis subassembly into the server.
From the front of the server, tighten the eight green screws that secure the rear
2.
chassis subassembly in the server.
Tighten the screws in the following order:
Lower right screw.
a.
b. Upper left screw.
Upper right screw.
c.
d. Lower left screw.
Remove the connector covers from the replacement rear chassis subassembly.
3.
4. Install the following components:
Install the Rear Chassis Subassembly
Servicing the Rear Chassis Subassembly 197