Oracle SPARC T7-4 Service Manual page 123

b. Connect the power cable to the drive backplane and the motherboard.
1 Data cable, drive backplane connections
2 Power cable, drive backplane connections
7. Insert the main module back into the server.
See "Install the Main Module" on page
8. Install the hard drives into the main module.
Refer to the notes that you took when removing the hard drives to install them back into their
original slots. See "Install a Hard Drive" on page
9. Power on the server.
See "Returning the Server to Operation" on page
Related Information
"Remove the Drive Backplane" on page 119
■
105.
94.
201.
Servicing the Drive Backplane
Install the Drive Backplane
123