Oracle SPARC T7-4 Service Manual page 63

This action protects the levers from damage while the module is outside the server.
7. Using two hands, completely remove the processor module or processor filler
module and place the module on an antistatic mat.
Do not touch the connectors at the rear of the module.
Caution -
Determine your next step.
8.
If you are replacing or installing DIMMs within the processor module, see
■
"Servicing DIMMs" on page
If you are replacing a faulty processor module, populate and install the
■
replacement processor module:
a. Remove all of the DIMMs from the faulty processor module, and set
them in a safe place.
See "Remove a DIMM" on page
Remove a Processor Module or Processor Filler Module
69.
78.
Servicing Processor Modules 63