Install a DIMM
If you are installing replacement DIMMs at this time, go to
■
DIMM" on page
If you are not installing replacement DIMMs at this time, go to
■
9.
Return the server to operation.
See:
Install the processor module.
■
See
Power on the server.
■
See
Verify DIMM functionality.
■
See
Related Information
"Understanding DIMM Configurations" on page 69
■
"Understanding DIMM Configurations" on page 69
■
"Determine Which DIMM Is Faulty (DIMM Fault LEDs)" on page 76
■
"Determine Which DIMM Is Faulty (PSH)" on page 75
■
"Install a DIMM" on page 80
■
"Verify a DIMM" on page 83
■
Install a DIMM
DIMMs are cold-service components that can be replaced by customers. For the location of the
DIMMs, see
Caution -
discharge. This discharge can cause failure of server components.
Consider your first steps.
1.
Familiarize yourself with DIMM population rules.
■
See
80
SPARC T7-4 Server Service Manual • May 2017
80.
"Install a Processor Module or Processor Filler Module" on page
"Power On the Server (Oracle ILOM)" on page
"Verify a DIMM" on page
"Processor Module Components" on page
This procedure requires that you handle components that are sensitive to electrostatic
"Understanding DIMM Configurations" on page 69
202.
83.
19.
"Install a
Step
9.
64.