Verify The Spm - Oracle SPARC T7-4 Service Manual

b. Restore the TPM data and keys that were backed up to the new SP you
install.
For information about migrating or restoring TPM data and keys, see
and Attached Devices in Oracle Solaris
9. Verify the installation of the SPM.
See "Verify the SPM" on page
10. Verify that the SPM date is correct.
-> show /SP/clock
/SP/clock
Properties:
datetime = Tue Sep 07 08:09:59 2013
timezone = GMT (GMT)
uptime = 0 days, 00:01:18
usentpserver = disabled
->
a.
Set the datetime property, if necessary.
-> set /SP/clock datetime=MMDDhhmmYYYY
b.
Set the timezone property, if necessary.
-> set /SP/clock timezone=3-to-4-characters
where the timezone value equals a three- or four-character timezone abbreviation, such as
EST.
Related Information
"Determine if the SPM Is Faulty" on page 125
■
"Remove the SPM" on page 126
■
"Verify the SPM" on page 131
■

Verify the SPM

1. Verify that the SP LED on the main module or rear I/O module is lit green.
See "Main Module LEDs" on page 100
11.3.
131.
or "Rear I/O Module LEDs" on page
Verify the SPM
Securing Systems
183.
Servicing the SPM 131