Oracle SPARC T7-4 Service Manual page 61

This procedure requires that you handle components that are sensitive to electrostatic
Caution -
discharge. This discharge can cause failure of server components.
1. Prepare the server for service.
See "Preparing for Service" on page
2. Ensure that the server is powered off.
See "Removing Power From the Server" on page
Disconnect the power cords.
3.
See "Disconnect Power Cords" on page
4. Locate the processor module in the server that you want to remove.
If you are replacing a faulty processor module, see
■
Processor Module Is Faulty" on page 60
module.
If you are adding a processor module, remove the processor filler module in
■
slot 1.
Remove a Processor Module or Processor Filler Module
43.
50.
53.
to locate a faulty processor
"Determine Which
Servicing Processor Modules 61