Removing Power From the Server
Place ESD-sensitive components, such as the printed circuit boards, on an antistatic mat. The
following items can be used as an antistatic mat:
Antistatic bag used to wrap a replacement part
■
ESD mat
■
A disposable ESD mat (shipped with some repacement parts or optional server components)
■
2.
Attach an antistatic wrist strap.
When servicing or removing server components, attach an antistatic strap to your wrist and then
to a metal area on the chassis.
Related Information
"Safety Information" on page 43
■
"Servicing Processor Modules" on page 55
■
"Servicing DIMMs" on page 69
■
"Servicing the Main Module" on page 99
■
"Servicing the Drive Backplane" on page 119
■
"Servicing the SPM" on page 125
■
"Servicing the SCC PROM" on page 133
■
"Servicing the Battery" on page 137
■
"Servicing the Front I/O Assembly" on page 143
■
"Servicing PCIe Cards" on page 165
■
"Servicing the Rear I/O Module" on page 183
■
"Servicing the Rear Chassis Subassembly" on page 193
■
Removing Power From the Server
These topics describe different methods for removing power from the chassis.
"Prepare to Power Off the Server" on page 51
■
"Power Off the Server (Oracle ILOM)" on page 51
■
"Power Off the Server (Power Button – Graceful Shutdown)" on page 52
■
"Power Off the Server (Power Button – Emergency Shutdown)" on page 52
■
"Disconnect Power Cords" on page 53
■
"Prevent ESD Damage" on page 49
■
50
SPARC T7-4 Server Service Manual • May 2017