How To Order; Drive Configurator; Ordering Form Type Code - Danfoss FC 300 Design Manual

FC 300 Design Guide

How to Order

Drive Configurator

It is possible to design an FC 300 frequency converter according to the application requirements by using
the ordering number SYSTEM.
For the FC 300 Series, you can order standard drives and drives with integral options by sending a type
code string describing the product a to the local Danfoss sales office, i.e.:
FC-302PK75T5E20H1BGCXXXSXXXXA0BXCXXXXD0
The meaning of the characters in the string can be located in the pages containing the ordering numbers
in the chapter How to Select Your VLT. In the example above, a Profibus DP V1 and a 24 V back-up option
is included in the drive.
Ordering numbers for FC 300 standard variants can also be located in the chapter How to Select Your
VLT.
From the Internet based Drive Configurator, you can configure the right drive for the right application
and generate the type code string. The Drive Configurator will automatically generate an eight-digit sales
number to be delivered to your local sales office.
Furthermore, you can establish a project list with several products and send it to a Danfoss sales repre-
sentative.
The Drive Configurator can be found on the global Internet site: www.danfoss.com/drives.

Ordering Form Type Code

How to Order
MG.33.B7.02 - VLT is a registered Danfoss trademark
63