Danfoss FC 300 Design Manual page 215

FC 300 Design Guide
Set digital output B low
Set digital output C low
Set digital output D low
Set digital output E low
Set digital output F low
Set digital output A high
Set digital output B high
Set digital output C high
Set digital output D high
Set digital output E high
Set digital output F high
Reset Counter A
Reset Counter B
Function:
Select the action corresponding to the SLC event.
Actions are executed when the corresponding
event (defined in par. 13-51) is evaluated as true.
The following actions are available for selection:
*DISABLED [0]
No action [1]
Select set-up 1 [2] - changes the active set-up
(par. 0-10) to '1'.
Select set-up 2 [3] - changes the active set-up
(par. 0-10) to '2'.
Select set-up 3 [4] - changes the active set-up
(par. 0-10) to '3'.
Select set-up 4 [5] - changes the active set-up
(par. 0-10) to '4'. If the set-up is changed, it will
merge with other set-up commands coming from
either the digital inputs or via a fieldbus.
Select preset reference 0 [10] – selects preset
reference 0.
Select preset reference 1 [11] – selects preset
reference 1.
Select preset reference 2 [12] – selects preset
reference 2.
Select preset reference 3 [13] – selects preset
reference 3.
Select preset reference 4 [14] – selects preset
reference 4.
Select preset reference 5 [15] – selects preset
reference 5.
Select preset reference 6 [16] – selects preset
reference 6.
Select preset reference 7 [17] - selects preset ref-
erence 7. If the active preset reference is
changed, it will merge with other preset reference
How to Programme
commands coming from either the digital inputs
[33]
or via a fieldbus.
[34]
Select ramp 1 [18] - selects ramp 1.
[35]
Select ramp 2 [19] - selects ramp 2.
[36]
Select ramp 3 [20] - selects ramp 3.
[37]
Select ramp 4 [21] - selects ramp 4.
[38]
Run [22] - issues a start command to the fre-
quency converter.
[39]
Run reverse [23] - issues a start reverse com-
[40]
mand to the frequency converter.
[41]
Stop [24] - issues a stop command to the fre-
[42]
quency converter.
[43]
Qstop [25] - issues a quick stop command to the
[60]
frequency converter.
[61] Dcstop [26] - issues a DC stop command to the
frequency converter.
Coast [27] - the frequency converter coasts im-
mediately. All stop commands including the coast
command stop the SLC.
Freeze output [28] - freezes the output frequency
of the frequency converter.
Start timer 0 [29] - starts timer 0, see par. 13-20
for further description.
Start timer 1 [30] - starts timer 1, see par. 13-20
for further description.
Start timer 2 [31] - starts timer 2, see par. 13-20
for further description.
Set digital output A low [32] - any output with
'digital output 1' selected is low (off).
Set digital output B low [33] - any output with
'digital output 2' selected is low (off).
Set digital output C low [34] - any output with
'digital output 3' selected is low (off).
Set digital output D low [35] - any output with
'digital output 4' selected is low (off).
Set digital output E low [36] - any output with
'digital output 5' selected is low (off).
Set digital output F low [37] - any output with
'digital output 6' selected is low (off).
Set digital output A high [38] - any output with
'digital output 1' selected is high (closed).
Set digital output B high [39] - any output with
'digital output 2' selected is high (closed).
Set digital output C high [40] - any output with
'digital output 3' selected is high (closed).
Set digital output D high [41] - any output with
'digital output 4' selected is high (closed).
Set digital output E high [42] - any output with
'digital output 5' selected is high (closed).
Set digital output F high [43] - any output with
'digital output 6' selected is high (closed).
MG.33.B7.02 - VLT is a registered Danfoss trademark
215