Parameter Lists - Danfoss FC 300 Design Manual

FC 300 Design Guide

Parameter Lists

FC Series
All = valid for FC 301 and FC 302 series
01 = valid for FC 301 only
02 = valid for FC 302 only
Changes during operation
"TRUE" means that the parameter can be changed while the frequency converter is in operation and
"FALSE" means that the frequency converter must be stopped before a change can be made.
4-Set-up
'All set-up': the parameter can be set individually in each of the four set-ups, i. e. one single parameter
can have four different data values.
'1 set-up': data value will be the same in all set-ups.
Conversion index
This number refers to a conversion figure used when writing or reading by means of a frequency con-
verter.
Conv. index 100 67
Conv. factor 1 1/60
Data type Description
2 Integer 8
3 Integer 16
4 Integer 32
5 Unsigned 8
6 Unsigned 16
7 Unsigned 32
9 Visible String
33 Normalized value 2 bytes
35 Bit sequence of 16 boolean variables
54 Time difference w/o date
How to Programme
6 5 4 3
1000000 100000 10000 1000
MG.33.B7.02 - VLT is a registered Danfoss trademark
2 1 0 -1 -2
100 10 1 0.1 0.01
-3 -4 -5 -6
0.001 0.0001 0.00001 0.000001
Type
Int8
Int16
Int32
Uint8
Uint16
Uint32
VisStr
N2
V2
TimD
239