Danfoss FC 300 Design Manual page 164

FC 300 Design Guide
4-60 Bypass Speed From [RPM]
Array [4]
Value:
0 - par. 4-13
Function:
Some systems call for avoiding certain output
speeds due to resonance problems in the system.
Enter the lower limits of the speeds to be avoided.
4-61 Bypass Speed From [Hz]
Array [4]
Value:
0 - par. 4-14 Hz
Function:
Some systems call for avoiding certain output
speeds due to resonance problems in the system.
Enter the lower limits of the speeds to be avoided.
4-62 Bypass Speed To [RPM]
Array [4]
Value:
0 - par. 4-13
Function:
Some systems call for avoiding certain output
speeds due to resonance problems in the system.
Enter the upper limits of the speeds to be avoided.
4-63 Bypass Speed To [Hz]
Array [4]
Value:
0 - par. 4-14
Function:
Some systems call for avoiding certain output
speeds due to resonance problems in the system.
Enter the upper limits of the speeds to be avoided.
factory setting
164
How to Programme
0 RPM
0 Hz
0RPM
0 Hz
() display text [] value for use in communication via serial communication port
MG.33.B7.02 - VLT is a registered Danfoss trademark