Danfoss FC 300 Design Manual page 210

FC 300 Design Guide
In range
On reference
Torque limit
Current limit
Out of current range
Below I low
Above I high
Out of speed range
Below speed low
Above speed high
Out of feedb. range
Below feedb. low
Above feedb. high
Thermal warning
Mains voltage out of range
Reversing
Warning
Alarm (trip)
Alarm (trip lock)
Comparator 0
Comparator 1
Comparator 2
Comparator 3
Logic rule 0
Logic rule 1
Logic rule 2
Logic rule 3
Time-out 0
Time-out 1
Time-out 2
Digital input DI18
Digital input DI19
Digital input DI27
Digital input DI29
Digital input DI32
Digital input DI33
Start command
Drive stopped
Function:
Select the first boolean (TRUE or FALSE) input for
the selected logic rule.
*False [0] (default setting) enters the fixed value
of FALSE in the logic rule.
factory setting
210
How to Programme
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
[20]
[21]
[22]
[23]
[24]
[25]
[26]
[27]
[28]
[29]
[30]
[31]
[32]
[33]
[34]
[35]
[36]
[37]
[38]
[39]
[40]
() display text [] value for use in communication via serial communication port
MG.33.B7.02 - VLT is a registered Danfoss trademark
True [1] enters the fixed value TRUE in the logic
rule.
Running [2] See parameter group 5-3* for further
description.
In range [3] See parameter group 5-3* for further
description.
On reference [4] See parameter group 5-3* for
further description.
Torque limit [5] See parameter group 5-3* for
further description.
Current limit [6] See parameter group 5-3* for
further description.
Out of current range [7] See parameter group
5-3* for further description.
Below I low [8] See parameter group 5-3* for fur-
ther description.
Above I high [9] See parameter group 5-3* for
further description.
Out of speed range [10] See parameter group
5-3* for further description.
Below frequency low [11] See parameter group
5-3* for further description.
Above frequency high [12] See parameter group
5-3* for further description.
Out of feedback range [13] See parameter group
5-3* for further description.
Below feedback low [14] See parameter group
5-3* for further description.
Above feedback high [15] See parameter group
5-3* for further description.
Thermal warning [16] See parameter group 5-3*
for further description.
Mains voltage out of range [17] See parameter
group 5-3* for further description.
Reversing [18] See parameter group 5-3* for fur-
ther description.
Warning [19] See parameter group 5-3* for fur-
ther description.
Alarm (trip) [20] See parameter group 5-3* for
further description.
Alarm (trip lock) [21] See parameter group 5-3*
for further description.
Comparator 0 [22] Use the result of comparator 0
in the logic rule.
Comparator 1 [23] Use the result of comparator 1
in the logic rule.
Comparator 2 [24] Use the result of comparator 2
in the logic rule.
Comparator 3 [25] Use the result of comparator 3
in the logic rule.