Danfoss FC 300 Design Manual page 233

FC 300 Design Guide
16-65 Analog Output 42 [mA]
Value:
0.000 - 30.000
Function:
View the actual value at output 42 in mA. The val-
ue shown reflects the selection in par. 06-50.
16-66 Digital Output [bin]
Value:
0 - 115
Function:
View the binary value of all digital outputs.
16-67 Freq. Input #29 [Hz]
Value:
0 - 0
Function:
View the actual frequency rate on terminal 29.
This parameter is available for FC 302 only.
16-68 Freq. Input #33 [Hz]
Value:
0 - 130000
Function:
View the actual value of the frequency applied at
terminal 33 as an impulse input.
16-69 Pulse Output #27 [Hz]
Value:
0 - 40000
Function:
View the actual value of impulses applied to ter-
minal 27 in digital output mode.
16-70 Pulse Output #29 [Hz]
Value:
0 - 40000
Function:
View the actual value of pulses to terminal 29 in
digital output mode.
This parameter is available for FC 302 only.
factory setting
How to Programme
0.000
() display text []
MG.33.B7.02 - VLT is a registered Danfoss trademark
16-71 Relay Output [bin]
Value:
0 - 31
Function:
View the settings of all relays.
0
16-72 Counter A
Value:
-2147483648 -2147483647
Function:
View the present value of Counter A. Counters are
0
useful as comparator operands, see par. 13-10.
The value can be reset or changed either via dig-
ital inputs (parameter group 5-1*) or by using an
SLC action (par. 13-52).
16-73 Counter B
Value:
0
-2147483648 -2147483647
Function:
View the present value of Counter B. Counters are
useful as comparator operands (par. 13-10).
The value can be reset or changed either via dig-
ital inputs (parameter group 5-1*) or by using an
SLC action (par. 13-52).
0
16-74 Precise Stop Counter
Value:
0 - 2147483647
Function:
Returns the actual counter value of precise coun-
ter (par. 1-84).
0
16-75 Analog In X30/11
Value:
0.000 - 0.000
Function:
View the actual value at input X30/11 of MCB 101.
value for use in communication via serial communication port
0
0
0
0
0.000
233