Danfoss FC 300 Design Manual page 204

FC 300 Design Guide
Function:
Select [0] to deactivate non-volatile storage of
data.
Select [1] to store parameter data received via
DeviceNet in EEPROM non-volatile memory as de-
fault.
10-39 Devicenet F Parameters
Array [1000]
Value:
No LCP access
0 - 0
Function:
This parameter is used to configure the drive via
Devicenet and build the EDS-file.
factory setting
204
How to Programme
() display text [] value for use in communication via serial communication port
MG.33.B7.02 - VLT is a registered Danfoss trademark
0