How To Order; Drive Configurator; Fc Identification - Danfoss VLT Micro Drive PK18 Design Manual

How to Order

VLT Micro Drive Design Guide
5 How to Order

5.1 Drive Configurator

It is possible to design a frequency converter according to
the application requirements by using the ordering
number system.
Frequency converters can be ordered as standard or with
5 5
internal options by using a type code string, i.e.
FC051PXXXXXXXXHXXXXXXXSXXX
Use the Internet-based Drive Configurator to configure the
right frequency converter for the right application and
generate the type code string. The Drive Configurator will
automatically generate an eight-digit sales number (either
for one product or a project list with several products) to
be delivered to your local sales office.
The Drive Configurator can be found on the global
Internet site: www.danfoss.com/drives.

5.2.1 FC Identification

Below is an example of the frequency converter nameplate
sticker. This sticker is located on the top of each frequency
converter and shows the ratings, serial number, warnings
catalog number, and other relevant data for each unit. See
for details, how to read the Type code string.
Illustration 5.1 This example shows the identification sticker.
®
40 MG02K102 - VLT is a registered Danfoss trademark