Danfoss FC 300 Design Manual page 131

FC 300 Design Guide
Function:
Select Full access [0] to disable the password de-
fined in par. 0-60 Main Menu Password. Select
Read only [1] to prevent unauthorised editing of
Main Menu parameters. Select No access [2] to
prevent unauthorised viewing and editing of Main
Menu parameters. If Full access [0] is selected
then parameters 0-60, 0-65 and 0-66 will be ig-
nored.
0-65 Quick Menu Password
Value:
0 - 999
Function:
Define the password for access to the Quick Menu
via the [Quick Menu] key. If par. 0-66 Access to
Quick Menu w/o Password is set to Full access [0],
this parameter will be ignored.
Access to Quick Menu w/o Pass-
0-66
word
Value:
Full access
Read only
No access
Function:
Select Full access [0] to disable the password de-
fined in par. 0-65 Quick Menu Password. Select
Read only [1] to prevent unauthorised editing of
Quick Menu parameters. Select No access [2] to
prevent unauthorised viewing and editing of Quick
Menu parameters. If par. 0-61 Access to Main
Menu w/o Password is set to Full access [0] then
this parameter will be ignored.
factory setting
How to Programme
200
[0]
[1]
[2]
() display text []
MG.33.B7.02 - VLT is a registered Danfoss trademark
value for use in communication via serial communication port
131